Introduction
The Dirty Water Pump in Plastic Casing in plastic casing manufactured by FLUENT are mostly the ones respectively economic and portable. The materials of the shell are all made in thermoplastic, including the handle, the pump body and the base. Therefore, it has the smaller weight and relatively less cost compared with the stainless models in the same power rate. Moreover, all three parts of the pump shell can be customized in color.
Specification
Depending on the different application scenarios and possible occasions, multiple models with various appearance have been designed, tested and manufactured by FLUENT. To further expand the practicability of the dirty water submersible pumps, equipped with different versions of the electrical motors manufactured by FLUETN, multiple power rates of the pumps are offered.
Generally, the power rate and its corresponding specification are listed as the following table, including its voltage, flow rates and maximum delivery heights. FLUENT also offers specially tuned motors to meet different specification demands. The motor with a voltage of 110V are available as well.
Output Connection
Considering the potential impurities in pumped water, dirty water submersible pumps are designed with a side water output. This output is mostly reserved on the pump base to further used for the water pipe connection with a thermoplastic made connector accessory contained in the package.
The standard connector paired with the dirty water submersible pump allows the fast connection of hoses in different diameters varying from 1" to 2" and connection with thread that meets BSP(British Standard Pipe Parallel Thread) standard or NPT(American National Pipe Taper) standard.
|
Thread Size/inch |
Outside Diagram |
|
|
inch |
mm |
|
|
G3/4'' |
1.041 |
26.441 |
|
G1'' |
1.309 |
33.249 |
|
G1 1/4'' |
1.650 |
41.910 |
|
G1 1/2'' |
1.882 |
47.803 |
|
G2'' |
2.347 |
59.614 |
Chart1. BSP Size
|
Thread Size/inch |
Outside Diagram |
|
|
inch |
mm |
|
|
3/4'' NPT |
1.050 |
26.670 |
|
1'' NPT |
1.315 |
33.401 |
|
1 1/4'' NPT |
1.660 |
42.164 |
|
1 1/2'' NPT |
1.900 |
48.260 |
|
2'' NPT |
2.375 |
60.325 |
Chart1. NPT Size
Manufacturer
With years spent in pump industry, FLUENT has become the professional water pump manufacturer and specialist in producing, developing domestic water pumps. With the business philosophy of "Innovation, Profession and Diversity", FLUENT is making further steps in intelligent manufacturing and future watering system exploration.
